| After-sales Service: | Online Technical Support |
|---|---|
| Warranty: | 1year |
| Heating Mode: | Transmission |
| Material Status: | Solution, Cream |
| Atomization: | Gas Atomization |
| Flow: | Parallel Flow |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Feature
Original imported nozzle, high efficiency.
Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
Fully automatic control: one-button start-up, after setting the spray process parameters, the temperature reaches the predetermined temperature, the peristaltic pump starts automatically, the running animation is displayed on the touch screen, and the running process is clearly displayed; just press the stop button when shutting down, the machine will automatically shut down safely.
Manual control: If you need to adjust the process parameters during the experiment, you can easily switch to the manual state, and the entire experiment process is dynamically displayed on the color touch screen (animation).
Equipped with a nozzle cleaner (through needle), when the nozzle is blocked, it will be automatically removed, and the frequency of the through needle can be automatically adjusted.
Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except for the fan, to ensure that the heating part of the equipment will not be burned out due to misoperation (forcibly turning off the fan).
The spraying, drying and collecting system is made of transparent high-quality borosilicate heat-resistant glass material, so that the drying process can be carried out in a pollution-free environment.
Built-in imported oil-free air compressor, the particle size of the powder is normally distributed, the fluidity is very good, and the noise is very low, less than 60db.
The atomization structure of the two-fluid spray, the whole machine is made of high-quality stainless steel, the design is compact, and no auxiliary equipment is required.
The design of drying temperature control adopts real-time regulation PID constant temperature control technology, which makes the temperature control in the whole temperature zone accurate, and the heating temperature control accuracy is ±1ºC.
In order to keep the sample pure, it is equipped with an air inlet filter.
(For benzene, methanol, ethanol and other materials, it is safer to choose a nitrogen gas device)
The feed volume can be adjusted by the feed peristaltic pump, and the minimum sample volume can reach 50ml.
The finished dry powder after drying has a relatively uniform particle size, and more than 98% of the dry powder is in the same particle size range.
For viscous materials, there is a nozzle cleaner (through needle), which will be automatically removed when the nozzle is blocked, and the frequency of needle through can be automatically adjusted.
Innovative tower wall purging device, higher material recovery rate.
Unique protection function, the fan does not start, the heating cannot start, and the fan air volume is adjustable.
| Inlet air temperature control: 30 ºC ~ 300 ºC |
| Outlet air temperature control: 30 ºC ~ 150 ºC |
| Evaporated water volume: 1500mL/H ~ 2000ml/h |
| Maximum amount of feed: the maximum amount is 2000ml/h (adjustable) |
| Feeding method: peristaltic pump adjustment, feeding volume: 30-2000ml/h |
| 50mLMinimum feed volume: 50mL |
| Temperature control accuracy: ±1ºC, using imported temperature control system |
| Average drying time: 1.0~1.5S |
| Dry air flux: air volume 0-330m3/h wind pressure 686Pa |
| Compressor: Imported oil-free air compressor with good fluidity and very low noise. 0.55KW, gas production 4.2m3/h, working pressure 2-5bar |
| Ejector (through needle): variable firing frequency (built-in 2.3bar compressed air supply |
| Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional 1, standard 1.0 and can be customized upon request |
| Shutdown protection function: Just press the stop button when shutting down, the machine will stop running immediately except for the fan, to ensure that the heating part of the equipment will not be burned out due to misoperation (forcibly turning off the fan). |
| Power of the whole machine: 3.5KW /220V (customized according to the voltage requirements of different countries) |
| Power of the whole machine: 3.5KW /220V (customized according to the voltage requirements of different countries) |
| Dimensions: 13000mm(H)×650mm(L)×800mm(W) |
Package Detail
Q1:Are you trading company or manufacturer?
A1:We are professional manufacture of lab equipment and we have our own factory which is a high-tech enterprise integrating R&D, production and sales. And welcome to visit our factory.
Q2: How long is your delivery time?
A2: Usually, delivery time is 30-45 days after receiving your payment.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}